Larval development of <Emphasis Type="Italic">Lightiella magdalenina</Emphasis> (Crustacea,Cephalocarida)

The larval development of the newly discovered cephalocarid from Mediterranean sea, Lightiella magdalenina, was analysed using light and scanning electron microscopy. Twenty-nine larval specimens, divided into 15 metanaupliar and 2 juvenile stages of development, were found. The first six metanaupliar stages had an even number (6, 8, 10, 12, 14 and 16) of trunk segments including telson. The condition of 20 trunk segments, typical of the adult, was reached after another 4 stages by the addition of a single segment per stage. At this tenth stage, the larvae had an incomplete number of trunk limbs. Another five stages were needed to complete the cephalic appendage development, passing from the metanaupliar to the juvenile stage, characterized by loss of the naupliar enditic process of the second antenna. Trunk limbs development was completed during the last two juvenile stages. According to the ontogenetic data reported for Hutchinsoniella macracantha and Lightiella incisa, these seventeen stages probably do not represent the complete developmental series. Nevertheless, they allow us to clarify the main features of cephalocarid ontogeny and show specific differences in the development of both the trunk segments and appendages.     

First trimester diagnosis of β-thalassaemia in a twin pregnancy

This paper reports the results of first trimester prenatal diagnosis in a twin pregnancy at risk for homozygous β°−thalassaemia (β°−39 mutant). Trophoblast samples from both twins were obtained at 10 weeks gestation with a forceps guided by ultrasound. Trophoblast DNA analysis, carried out with the oligonucleotide technique, revealed that one fetus was homozygous and the other heterozygous for the β−39 mutant. This diagnosis was confirmed at 17 weeks gestation by amniocyte DNA analysis. DNA polymorphism analysis within the α-globin gene provided useful genetic markers for twin differentiation.     

Methane–air detonation experiments at NIOSH Lake Lynn Laboratory

The methane–air detonation experiments are performed to characterize high pressure explosion processes that may occur in sealed areas of underground coal mines. The detonation tube used for these studies is 73 m long, 105 cm internal diameter, and closed at one end. The test gas is 97.5% methane with about 1.5% ethane, and the methane–air test mixtures varied between 4% and 19% methane by volume. Detonations were successfully initiated for mixtures containing between 5.3% and 15.5% methane. The detonations propagated with an average velocity between 1512 and 1863 m/s. Average overpressures recorded behind the first shock pressure peak varied between 1.2 and 1.7 MPa. The measured detonation velocities and pressures are close to their corresponding theoretical Chapman-Jouguet (CJ) detonation velocity (D_CJ) and detonation pressure (P_CJ). Outside of these detonability limits, failed detonations produced decaying detached shocks and flames propagating with velocities of approximately 1/2 D_CJ. Cell patterns on smokefoils during detonations were very irregular and showed secondary cell structures inside primary cells. The measured width of primary cells varied between 20 cm near the stoichiometry and 105 cm (tube diameter) near the limits. The largest detonation cell (105 cm wide and 170 cm long) was recorded for the mixture containing 15.3% methane.     

The impact of traditional coffee processing on river water quality in Ethiopia and the urgency of adopting sound environmental practices

Although waste from coffee processing is a valuable resource to make biogas, compost, and nutrient-rich animal food, it is usually dumped into nearby water courses. We carried out water quality assessment at 44 sampling sites along 18 rivers that receive untreated waste from 23 coffee pulping and processing plants in Jimma Zone, Ethiopia. Twenty upstream sampling sites free from coffee waste impact served as control, and 24 downstream sampling sites affected by coffee waste were selected for comparison. Physicochemical and biological results revealed a significant river water quality deterioration as a result of disposing untreated coffee waste into running water courses. During coffee-processing (wet) season, the highest organic load (1,900?mg/l), measured as biochemical oxygen demand, depleted dissolved oxygen (DO) to a level less than 0.01?mg/l, and thus curtailed nitrification. During off season, oxygen started to recuperate and augmented nitrification. The shift from significantly elevated organic load and reduced DO in the wet season to increased nitrate in the off season was found to be the determining factor for the difference in macroinvertebrate community structure as verified by ordination analysis. Macroinvertebrate diversity was significantly reduced in impacted sites during the wet season contrary to the off season. However, there was a significant difference in the ratio of sensitive to pollution-tolerant taxa in the off season, which remained depreciated in the longer term. This study highlights the urgency of research exploring on the feasibility of adopting appropriate pollution abatement technologies to implement ecologically sound coffee-processing systems in coffee-growing regions of Ethiopia.     

mtDNA control region and D-HPLC analysis: a method to evaluate the mating system in Syngnathidae (Teleostei)

Mitochondrial DNA (mtDNA) has been used extensively in animals for phylogenetic and population studies but it has been applied only occasionally to mating systems analysis, where nuclear markers are usually preferred. We used denaturing-high performance liquid chromatography (D-HPLC) to detect mitochondrial DNA polymorphisms to assess the genetic mating system in Syngnathus abaster. Our study of ten pregnant males, revealed polygyny in 30% of the males, who carried embryos originating from multiple females. In addition, 30% of the pregnant males carried embryos with the same mitochondrial haplotype. This is not sufficient to demonstrate polyandry but allows a rapid selection and a reduced sample size for further studies. In conclusion, the proposed technique is time- and cost-effective, allows the certain identification of polygyny and provides useful information to study polyandry.     

Modeling dispersion from toxic gas released after a train collision in Graniteville, SC

The Savannah River National Laboratory (SRNL) Weather Information and Display System was used to provide meteorological and atmospheric modeling/consequence assessment support to state and local agencies after the collision of two Norfolk Southern freight trains on the morning of January 6, 2005. This collision resulted in the release of several toxic chemicals to the environment, including chlorine. The dense and highly toxic cloud of chlorine gas that formed in the vicinity of the accident was responsible for 9 fatalities and caused injuries to more than 500 others. Transport model results depicting the forecast path of the ongoing release were made available to emergency managers in the county's Unified Command Center shortly after SRNL received a request for assistance. Support continued over the ensuing 2 days of the active response. The SRNL also provided weather briefings and transport/consequence assessment model results to responders from the South Carolina Department of Health and Environmental Control, the Savannah River Site (SRS) Emergency Operations Center, Department of Energy headquarters, and hazard material teams dispatched from the SRS. Operational model-generated forecast winds used in consequence assessments conducted during the incident were provided at 2-km horizontal grid spacing during the accident response. High-resolution Regional Atmospheric Modeling System (RAMS, version 4.3.0) simulation was later performed to examine potential influences of local topography on plume migration in greater detail. The detailed RAMS simulation was used to determine meteorology using multiple grids with an innermost grid spacing of 125 m. Results from the two simulations are shown to generally agree with meteorological observations at the time; consequently, local topography did not significantly affect wind in the area. Use of a dense gas dispersion model to simulate localized plume behavior using the higher-resolution winds indicated agreement with fatalities in the immediate area and visible damage to vegetation.     

Pyrolysis and combustion of Aroclor 1254 contaminated dielectric fluids

Pyrolysis and combustion products were determined for several levels of PCB contamination in mineral oil and other dielectric fluids. Yields of PCDFs were roughly proportional to the quantity of PCB in the feed.     

ETEX: A European tracer experiment; observations, dispersion modelling and emergency response

In Autumn, 1994, two releases of perfluorocarbon tracers from north-east France were tracked across northern Europe using a network of 168 ground stations with limited airborne sampling support. Simulating an emergency response situation, modellers from 20 countries reported their long-range dispersion predictions, initially within a few hours of the release and then over the coming days in line with the evolving meteorological data. Subsequent comparison of the predictions with the environmental results showed model performance varying from good, for the conditions of the first release in the majority of cases, to unsatisfactory for the second release in all cases. The experimental database now established represents a unique tool for investigating the effectiveness of future model developments. The papers in this special issue reflect the major scientific results